Frame side attachment type.
Thin type with 20mm in thickness.
Energized unlocking type.
With cam lock used together, lock can be released with a key in an emergency. (power failure for example)
Specifications
Rated voltage: DC24V±5%
Power consumption: 2W (83mA)
Duty cycle: 100% (continuous rating)
Material: Case: Cold rolled steel plate (SPCC)
Latch: Cold rolled stainless steel (SUS)
Finish: Case: Nickel plating (MFNi)
Accessories: stopper plate
Ambient temperature: -5℃ to +40℃
(non-condensing)
Operating humidity range: 85％RH or less (non-dewing)
Mass: 220g
Specific Use
Lock/unlock control system for compact boxes such as keybox locks
Remarks
Use on the right-hand door. (Refer to the installation diagram)
Remove the load on the sickle (latch) when operating electrically.
When continuously energized, the solenoid becomes hot (around 70℃). If there is a risk of it being touched, measures should be taken to prevent burns with consideration given to heat radiation.
